Huirong showcases PCIe 6.0 enterprise-level SSD controller SM8466, supporting a single disk capacity exceeding 512TB

📅 2026-11-20

Abstract:

Solid-state drive main control chip manufacturer Silicon Motion recently demonstrated its enterprise-level SM8466 main control chip for data centers. The main control chip uses the PCIe 6.0 interface and supports a maximum sequential transfer speed of 28GB per second and a maximum capacity of 512TB.

qcTaJHoZfFpj8LgLvN26X3-1200-80.jpg.webp

Huirong has completed the tape-out of the final version of SM8466, and related samples will be provided to partners in the near future. The PCIe 6.0 enterprise-class solid-state drive that actually uses this main control chip is expected to be on the market by the end of 2027 or early 2028.

Supports single disk capacity exceeding 512TB:

The SM8466 main control chip is mainly aimed at data centers and large-scale cloud computing environments, using PCIe 6.x x4 host interface and 16 NAND flash memory channels. Highlights include support for single-disk capacities exceeding 512TB, sequential transfers up to 28GB per second, and IOPS exceeding 7 million.

In terms of standards, the chip supports NVMe 2.0 and OCP NVMe 2.5 SSD specifications. Huirong also designed an independent command architecture for the new master, which separates the command and address transmission paths in the NAND interface to improve parallel processing capabilities and effective throughput.

Note: The above parameters are the theoretical maximum performance of the main control chip. The actual product ultimately depends on the flash memory and product configuration adopted by the solid-state drive manufacturer. Not all products can achieve the nominal maximum performance of the main control chip.

DMLwAW3aC4KBHD255d4Y8R-1200-80.jpg.webp

Huirong consumer-grade PCIe 6.0 main control chip has other plans:

The SM8466 main control chip is an enterprise-level SSD main control chip designed by Huirong for large data centers. This chip will not be used in consumer-level products (but it may be used in consumer-level products as an enterprise-level backward product in a few years).

Huirong has other plans for a consumer-grade PCIe 6.0 main control chip. The consumer-grade PCIe 6.0 main control chip code-named Neptune is planned to be launched at the end of 2027. Consumer-grade solid-state drives based on this chip will not appear one after another until 2028.

At this stage, PCIe 6.0 solid-state drives are not of much significance to individual users. The main reason is that currently consumer-grade PCIe 6.0 motherboards have not yet been widely deployed. After subsequent motherboards are gradually upgraded, this type of solid-state drives will gradually become popular.

Related tags

Related articles

Comments

0/500
Captcha (click to refresh)
No comments yet